Mass transport in Triton X series nonionic surfactant solutions: a new approach to solute-solvent interactions

Densities, viscosities and tracer diffusion coefficients for solutions of the nonionic surfactants Triton X-45, X-114, X-100 and X-102 in water (except for Triton X-45) and methanol, and for Triton X-100 in three water-methanol mixtures have been measured at 298.15 K and 308.15 K. The activation energy for viscous flow and the contributions to it from solute and solvent have been calculated. Comparison of the Gibbs energies of these systems shows the roles of polyoxyethylene chains of Triton X molecules in the interactions between solute and solvent, and also the effects of solvents on the inter-actions for different solutes. The viscosityB coefficients are positive for all of the surfactant solutions, and the temperature coefficients ofB are negative. In the non-micellar solutions in methanol, values ofB are small and the temperature coefficient ofB is nearly zero. In water-methanol mixtures the critical micelle concentration becomes larger as the methanol content increases up to 40% w/w; micelles are not formed at higher methanol concentrations. TheB coefficient decreases with increasing proportion of methanol in the solvent, and the temperature coefficient ofB changes from a fairly large positive value at low methanol contents to a small negative value at 80% w/w methanol.     

5种生物胺的毛细管胶束电动色谱分离

在胶束电动色谱模式下考察了影响生物胺分离的几个因素(如缓冲溶液及SDS浓度、pH、表面活性剂、分离温度及外加电压等)并优化了分离条件,建立了一种简单快速的利用毛细管胶束电动色谱DAD检测器分离分析生物胺的新方法。当缓冲溶液为40mmol/L硼酸缓冲液(pH8.5)、68mmol/LSDS,分离电压为25kV、分离温度为25℃时,5种生物胺在7min内实现了令人满意的基线分离。在优化的条件下,对其线性范围、检出限和重现性进行了测定。结果表明,生物胺的迁移时间的重现性<0.8%,面积的重现性<4%。     

应变速率和电位对应力腐蚀裂纹扩展的影响

以滑移-溶解-再钝化模型为基础,推导出应力腐蚀裂纹扩展速率与裂尖应变速率和电位之间的理论公式.计算表明,在裂纹扩展速率与裂尖应变速率的关系曲线中有两个特征区域.裂纹扩展速率在区域I随裂尖应变速率增加而增大,而在区域II不随裂尖应变速率的改变而变化.用慢应变速率拉伸技术（SSRT）测量了304L不锈钢的裂纹增长速率.当电位控制在区域II的阳极区时,理论计算的裂纹扩展速率与实验得到的结果比较吻合.     

Coaxial electrospinning core-shell fibers for self-healing scratch on coatings

Polystyrene (PS) fibers with core-shell structure were prepared by coaxial electrostatic spinning using liquid epoxy or curing agent as the core and PS solution as the shell. Scratch self-healing coatings were realized by using the healant-loaded core-shell fibers in the matrix.     

Synthesis and lysozyme adsorption of rod-like large-pore periodic mesoporous organosilica

Highly ordered rod-like large-pore periodic mesoporous organosilica (PMO) was successfully synthesized at low acid concentration with the assistance of inorganic salt using triblock copolymer P123 as a template. The roles of inorganic salt and acidity in the production of highly ordered mesostructure and the morphology control of PMOs were investigated. It was found that the inorganic salt can significantly widen the range of the synthesis parameters to produce highly ordered 2D hexagonal pore structure of p6mm symmetry. However, the uniform rod-like PMOs can only be synthesized in a narrow range of acid and salt concentrations, which were sensitive to induction time. The adsorption of lysozyme on PMO was studied at different pH values in comparison with adsorption on pure silica material under controlled morphology and pore structure. It was found that the adsorption capacity of lysozyme on the PMO was lower than that on pure SBA-15 silica material and the adsorption amounts are larger at pH 9.6 than at 7.0 for both materials. The results show that the electrostatic interaction between lysozyme and PMO/SBA-15 surface is more dominant than the hydrophobic forces and the interaction of neighboring lysozyme molecules also plays an important role.     

Acetic acid induced self-assembly of supramolecular compounds [Et4N]3[(WS4Cu2)2(mu-CN)3].2MeCN and [PPh4][WS4Cu3(mu-CN)2].MeCN from preformed clusters [A]2[WS4(CuCN)2] (A = Et4N, PPh4)

Reactions of two preformed trinuclear W/Cu/S clusters, [A](2)[WS(4)(CuCN)(2)] (1: A = Et(4)N; 2: A = PPh(4)), with different concentrations of acetic acid in MeCN generate two interesting 2D polymeric clusters [Et(4)N](3)[(WS(4)Cu(2))(2)(mu-CN)(3)].2MeCN (3), and [PPh(4)][WS(4)Cu(3)(mu-CN)(2)].MeCN (4), respectively. Compound 4 can also be readily obtained in a high yield from the reaction of 2 with equimolar [Cu(MeCN)(4)]PF(6) in MeCN. These compounds have been characterized by elemental analysis, IR spectra, thermal analysis, and single-crystal X-ray diffraction. An X-ray analysis reveals that compound 3 retains the WS(4)Cu(2) cluster core, which serves as a 3-connecting node to link equivalent nodes via single cyanide bridges, forming an anionic 2D (6,3) net. Compound 4 consists of a T-shaped WS(4)Cu(3) core, which also acts as a 3-connecting node, with links to 3 equivalent clusters either through single or double cyanide bridges, affording a different anionic 2D (6,3) network. The acetic acid induced aggregation of 3 and 4 from the two cluster precursors 1 and 2 suggests that this simple synthetic strategy is likely to be applicable to many related systems.     

Synthesis of a Photolabeling Probe for the Study of Antiviral Mechanism of Ribavirin

Ribavirin has been used in urgency to treat SARS patients recently. In order to study its antiviral mechanism by photolabeling approach, we have synthesized and characterized 5-azido-1-β-D-ribofuranosyl-1,2,4-triazole-3-carboxiamide 1 as a photolabeling probe of ribavirin. The azidotriazole nucleoside showed rapid and clean photochemical reaction, suggesting that 1 is a promising probe to study the antiviral mechanism ofribarivin by photolabeling.     

Study of hexane adsorption in nanoporous MCM-41 silica

We study here the adsorption of hexane on nanoporous MCM-41 silica at 303,313, and 323 K, for various pore diameters between 2.40 and 4.24 nm. Adsorption equilibria, measured thermogravimetrically, show that all the isotherms, that are somewhat akin to those of type V, exhibit remarkably sharp capillary adsorption phase transition steps and are reversible. The position of the phase transition step gradually shifts from low to high relative pressure with an increase in the temperature as well as the pore sizes. The isosteric heats of adsorption derived from the equilibrium information using the Clapeyron equation reveal a gradual decrease with increasing adsorbed amount because of the surface heterogeneity but approach a constant value near the phase transition. A decrease in the pore size results in an increase in the isosteric heat of adsorption because of the increased dispersion forces. A simple strategy, based on the Broekhoff and De Boer adsorption theory, successfully interprets the hexane adsorption isotherms for the different pore size MCM-41 samples. The parameters of an empirical expression, used to represent the potential of interaction between the adsorbate and adsorbent, are obtained by fitting the monolayer region prior to capillary condensation and the experimental phase transition simultaneously, for some pore sizes. Subsequently, the parameters are used to predict the adsorption isotherm on other pore size samples, which showed good agreement with experimental data.     

应用反向传播神经网络预测化合物脑血分配系数

选用27种三维结构性质描述符对脑血分配系数预测建立神经网络模型.网络模型选用典型的适合函数逼近的两层结构神经网络对脑血分配系数(lgBB,BB为脑血浓度比)进行预测,计算中采用的模型具有一个双曲正切型激活函数的隐含层和一个线性激活函数的输出层.计算表明,使用小心选择的反向传播神经网络模型对化合物脑血分配系数具有较好的预测能力.